The technology INTELLEQT srl uses in manufacturing of all its equipment is carefully designed to offer the best product. For this reason all materials coming into contact with milk were chosen as to be suitable not only for food contact, but rather specifically for milk.

This is indeed a food that requires great care when handled, to avoid the loss of its nutritional properties. An innovation that INTELLEQT srl adopted on their own machines is a special type of pump, called PERISTALTIC PUMP, which, as you can see from the video on the right, never reaching high speeds, avoids centrifuging milk, which would cause air bubbles. This way, the product remains inside the tube, thus avoiding both stagnation in any cracks (for there is no one), and entering into contact with mechanical parts that could cause the spread of germs and bacteria.

Another important feature of INTELLEQT's Raw Milk Dispensers are joints, which have been declared fit for contact with food material according to the legislation DIN 11851, and the choice of butterfly valves rather than ball valves in order to make fully accessible every square inch of the dispensing unit when it is being washed. In fact, in tools such as globe valves there are unaccessible cavities, where may proliferate bacteria and germs harmful to health, which would then come in contact with milk.

Butterfly Valve	Ball Valve

All tubes that form the dispensing unit are also interchangeable, as to allow the owner to replace them and then wash the entire unit off site. A dispensing compartment wash is also run after each supply and, where a long time between supplies takes place, every 20 minutes (user definable). This ensures a clean compartment in the event of prolonged disuse of the distributor.

The refrigeration unit adopted by INTELLEQT srl is industrial-type, self-defrosting and equipped with compressors for a volume twice the actual. This feature allows you to maintain a constant inner temperature even in adverse weather conditions (which may be a very hot weather), avoiding any possible block of the system due to engine meltdown.

Each tank is supplied with an identification number that, when read by a control system, won't allow reuse of the same one for two consecutive times. This way, you cannot re-fill it, but you have to change the tank with one containing fresh milk.

Everything is controlled by a software that, as well as avoiding tanks refilling, it will not allow sale if the internal temperature exceeded 4°C or when the tank has not been replaced for more than 24 hours.

INTELLEQT srl also cares about the construction of log cabins combined with their Raw Milk Dispensers. Unlike many others, INTELLEQT srl buys wooden houses with 1.38 inch thick walls (instead of 0.7 inch or 1 inch) , since they are much more durable and reliable.